Useful model "Hive frame" refers to the field of beekeeping and can be used in beehive hives.The purpose of the utility model is: to improve the manufacturability of manufacturing frame parts simplify the assembly of the frame Exclusion of deformation of the wax along the vertical and across the plane of the wax during thermal expansion.The goal is achieved by the fact that the "beehive frame" consisting of two upper bars, one lower bar and two identical plastic side panels is complemented by a second lower bar, both lower bars having the same cross-section as the upper bars, for example with sizes ranging from 8 × 8 mm to 11 × 11 mm, and also supplemented with workplaces for the ends of the additional bar in the corresponding lower parts of the plastic side bars. The plastic side panel is a 1-2 mm thick plate with a rim around the perimeter that projects into the outside of the frame at a height of at least 10 mm, as well as work places for the ends of all bars in the form of blind cavities in the console protrusions, the latter are directed to the outer part of the frame perpendicular to the plastic side strips. The surface of the plate facing the inside of the frame is flat and contains the inlets of the blind cavities for the ends of all the bars. The ends of the bars touch the inner side of the bottom of the blind cavity of the opposite cantilever projections. The blind cavities of the cantilever projections have a cross section with dimensions corresponding to the cross-sectional dimensions of the bars, for example in the range of 8 × 8 mm to 11 × 11 mm. The distances from the surface of the plate facing the inner side of the frame to the bottoms of the upper blind cavities are in the range of 20 to 25 mm, and to the bottoms of the lower blind cavities are in the range of 7 to 9 mm. At the same time, from the surface of the plate facing the inside of the frame, the upper arms extend at least 21-26 mm, the lower arms extend at least 8-10 mm. The thickness of th
