A sheet-fed system designed to print multilayer PCBs is introduced. The system consists of four main blocks; a drilling station, a patterning station, a stacking/bonding station, and a sintering zone. The substrate PCB is shuttled between these various stations, to have vias drilled, to be attached to stacks of previously-processed layers, to be covered with conductive paths by means of the aforementioned ink, and to have the ink sintered under a controlled temperature and atmosphere. Patterning is accomplished by means of a novel two-step method involving both high-temperature conductive elements, low- temperature conductive elements, and flux. Two such compositions are successively applied and individually sintered to form a single conductive path; the second application serves to fill the porosities of the first layer. By this method, a highly-conductive trace is obtained without requiring high temperatures, which in turn allows use of common substrates including polymers.
