PURPOSE: A vinyl house equipped with a snow removing function is provided to install the roof of a vinyl house with a tilt, thereby removing immediately the snow or rain without any accumulation. CONSTITUTION: A vinyl house equipped with a snow removing function comprises the following steps. Both sides of a house main body(10) are equipped with a frame, and a space part(14) comprising an opened upper part is formed inside of the house main body. One side of the frame is shorter than the other side. A roof member(20) is positioned with a tilt toward the lower direction of one frame by the length difference of the two frames. An angle control means(30) controls the angle by elevating or dropping the roof member. A process means(40) collects and process the dropping snow and rain when the roof member elevates, and supply warm air to the space part inside. A cylinder tool is fixed and installed inside of the other frame. A cylinder shaft(32) moves vertically according to the operation of the cylinder tool, and controls the angle by elevating or dropping the roof member. A housing(41) has an open upper part inside, and a processing place for collecting the snow and the rain is formed inside of the housing. A cover(42) is installed in the upper part of the housing to be opened and closed. An exothermic member(43) melts the snow collected inside, or heats the air flowed from the outside. A suction fan(44) is formed on one side of the outer wall of the housing, and flows in the outside air. A supply opening(45) supplies the outside air heated by the exothermic member to the inside of the space part. A drainpipe drains the snow and the rain collected and processed in the processing place to the underground. A storage tank is capable of supplying water to the space part.본 발명은 비닐하우스의 지붕을 경사지게 설치하여 눈, 비가 이 경사에 의해 적체되지 않고 곧바로 제거될 수 있으며, 순간 적설량이 많아 지붕에 눈이 적체될 시에는 지붕의 일측을 승, 하강시켜 그 각도를 조절함으로써 적체된 눈을 하측으로 떨어뜨려 제거함과 동시에 제거된 눈은 발열부재에 의해서 해빙처리되어 지하로 흘려버리거나 저장해 두었다가 농업용수로 재활용할 수 있으며,
