Problem to be solved: to provide a hanging holder which can be used by one person.The outer circumference and the inner periphery of the outer circumference are reduced and formed.The outer circumference and the inner circumference where the inner circumference is removed are processed by the laser in such a shape that the finger is bent perpendicularly at both ends of the frame plate of isosceles triangle shape, and it stands upwards.The part of the finger is the hanging part.The space to be formed next to the hanging bar part is defined as a deep groove part.The inside of the center of the frame is spread into a small fanA small groove is formed in the center of the lower end of the fan by laserThe upper end of the small groove is fixed to the surface and the back surface of the fan-shaped portion in a state where the lower end of the irregular short semicircular bar t is aligned.It is hung in the small groove, and the hanging holder is hung by the string which is tied in the upper part.In addition, the distal end of the Coyle spring W is inserted into the inner diameter of the short pipe P which is fixed to the upper side of both ends of the frame, and is located at the upper part of the deep groove.The parts of the shape of the shape of 30% donut are fixed to both sides around the bottom of the right and left deep groovesThe front edge of the Coyle spring is made up and down in the case where the string string of the strap is attached to the hanging bar portion.Diagram【課題】自分一人で使用できる吊り下げホルダーを提供する。【解決手段】外周と外周を縮小した内周とを形成し、その内周内を削除させた外周と内周とが二等辺三角形状の枠板の両端部双方それぞれに指を直角に曲げて上に立てたような形状にレーザーで加工し、その指の部分を掛け棒部分とし、その掛け棒部分の横に形成する空間を深溝部分とし、枠板の上辺の中心の内側を小さな扇状に広げ、その扇状の下端部の中心に小さな溝をレーザーで形成し、その小さな溝の上端位置に異形短尺半円棒Ｔの下端の位置を合せた状態で扇状部分の表面と裏面とに固着し、その小さな溝に嵌めて上部で結び留める紐で吊り下げホルダーを吊り下げし、さらに枠板の両端部双方の上辺に固着する短尺パイプＰの内径内に差し入れるコイルバネＷ先端部を深溝上部に位置し、左右の深溝の底辺回りの両面双方に異形半割ドーナツ形状の部品を固着し、掛け棒部分に帯紐の紐穴を付け外しする場合にコイルバネの先端部が上下するようにした。【選択図】図１
