PURPOSE: A fruit juice manufacturing machine is provided to facilitate the processing of agricultural products and the treatment after manufacturing juice as well, and to easily clean a filtering net cask.CONSTITUTION: A body(1) is supported by supporting legs(1a) at a certain height. Fixed blades are installed inside of an inlet part(2a) with a constant gap. The fixed blade end is protruded toward the path. A cutting blade(20), which is equipped with rotary blades(22) rotating by force, is installed on the rotary shaft(23) so that the blade is passed through between the fixed blade end and the fixed blade. A cutting feed part(2) is connected to a cut material supply unit(50) in the filtering net cask entrance. A transfer screw(3) with a screw groove(3a) on the surface is supported by a shaft holder equipped in the body, and is rotated by force. The filtering net cask(5) is connected to the cut material supply unit, which is connected to a cut material vent of the cutting feed part, on one end and a discharge hole of a dregs discharge room(4) on the opposite end. A juice receiving chamber(6) makes juice collected in the filtering net cask, and is formed with a discharge pipe(6a) on one side. A male screw pipe(7b) of a control lever(7a) is connected to a shaft rod(3b) of the transfer screw and bearings, and rotates in-situ. An open-close ring(73) is connected to a movement screw pipe screw-assembled in the circumference of the male screw pipe, and accumulates elasticity by installing a coil spring(7d) in the connecting part. A control device(7f,7g) controls the rotation of the control lever.COPYRIGHT KIPO 2013본 발명은 각종 과일과 야채를 비롯하여 농산물의 열매와 잎과 줄기를 세절하고 압착하여 과즙과 찌꺼기로 분리할 수 있는 과일즙 제조기에 관한 것으로 보다 구체적인 것은,일정높이에 지지되도록 지지각을 가진 몸체 상면 일측으로 과일세절 칼날이 장치된 세절공급부를 형성하여 세절공급부의 배출구와 연계되게 몸체 상면에서 가로방향으로 설치되며 반 원통형 망체로 구성된 여과망통과 여과망통 중심부에 설치되어 여과망통 속으로 세절물을 이송하면서 압착하는 이송스크류와 여과망통 외주로 설치된 과즙수용부로 이루어진 과즙제조부와 여과망통끝에 설치된 찌꺼기 배출부와 찌꺼기 배출부의 배출공에 장치되어 찌꺼기 배출공의 크기를 조절하는 찌꺼기 배출조정부를 구비하여서 이루어지는
