To provide a folding type carrying platform which can carry out work which is most important safely and comfortably, and which can be folded smoothly at the same time.SOLUTION: In a foldable platform 1, a front leg 7, a rear leg 9 and a seat 2 are connected by a pair of left and right symmetrical fulcrums 10, 4, 6, 11, respectively, and a loading platform 14 is provided on the front leg back side In addition, when the stopper pipe 12 is positioned in the front groove, when the stopper pipe 12 is positioned in the front side groove, the state is slightly inclined to the front side about the fulcrum 13, and when the loading platform is lifted, the stopper pipe is automatically In order to collapse smoothly, collapse to the front side. Also, the upper part of the stopper pipe connected to a pair of fulcrums symmetrical with respect to symmetry and provided at the bottom part of the rear leg has symmetrical front side grooves provided in the lower part of the loading platform and projections for stopping the stopper pipe at the rear part, There is no fear that the stopper pipe will come off from the groove even if the loading platform is fixed by placing it in one of the shallow depths of the rear groove.(FIG.【課題】最も大事である安全で楽に担ぎ作業が出来、併せて、スムーズに折りたたみが出来る折りたたみ式担ぎ台を提供する。【解決手段】折りたたみ式担ぎ台1は、前脚7と後脚9と腰掛台2をそれぞれ左右対称の一対の支点10、4、6、11で連結させて、荷台14は前脚背側に設けた支点軸15に連結させてそれぞれに折りたたみが出来るようにし、更に、ストッパーパイプ12が前側溝に位置している時に支点13を軸に前側に少し傾いた状態にし、荷台を持ち上げるとストッパーパイプは自動的に前側に倒れて、折りたたみがスムーズに出来るようにする。又、後脚底部に設けた左右対称で一対の支点に連結させたストッパーパイプ上部を、荷台下部に設けた左右対称の前側溝と、後部にストッパーパイプを止める突起物があり前側溝よりも溝深さが浅い後側溝のいずれかに入れて荷台を固定させても、ストッパーパイプが溝から外れる恐れがない。【選択図】図1
