Minitank for irrigation is intended for the field of agriculture, or irrigation of plants in greenhouses or gardens. Minitank for irrigation allows equal watering, which means, that each plant receives an equal amount of water at a certain amount of time. Minitank for irrigation is made of polypropylene body (1), has two inlet hoses (4, 5) for supplying water and one outlet water drainage hose (6). The number of drainage hoses is arbitrary and depends on the size of the casing and the number of plants that are watered from one minitank for irrigation. The miniatank for irrigation is connected to a pump that pushes water at a pressure of 2 bar with the inlet hose (4), while the second inlet hose (5) does not receive water pressure of 1 to 3 bar and blocks the outlet hose (6). When the minitank for irrigation is filled with water, the pressure in the inlet hose (5) will increase and the pressure switch will shut off the pump. With the external valve, the pressure in the inlet tube is released, which leads to the release of water by a free fall from the minitank for irrigation.Minirezervoar za navodnjavanje je namenjen oblasti poljoprivrede, odnosno navodnjavanju biljaka u plastenicima ili baštama. Minirezervoar za navodnjavanje omogućava ujednačeno zalivanje, odnosno da svaka biljka u određeno vreme dobije jednaku količinu vode. Minirezervoar za navodnjavanje je napravljen od polipropilenskog kućišta (1), ima dva ulazna creva (4, 5) za dovod vode i jedno izlazno crevo (6) za odvod vode. Broj odvodnih creva je proizvoljan i zavisi od veličine kućišta i broja biljaka koje se zalivaju iz jednog minirezervoara za navodnjavanje. Minirezervoar za navodnjavanje je dovodnim crevom (4) priključen na pumpu koja gura vodu pod pritiskom od 2 bara, dok drugo ulazno crevo (5) ne dobije pritisak vode od 1 do 3 bara i blokira izlazno crevo (6). Kada se minirezervoar za navodnjavanje napuni vodom, pritisak u ulaznom crevu (5) će porasti i presostat će isključiti pumpu. Pomoću eksterno
