A kind of " structural improvement of granule-forming machine ",It mainly is equipped with the pressing wheel mechanism that transmission motor drives Inner extrusion material in body side,Can the turn in net mould,And it is equipped with a head in the front of body,The side of the head is equipped with several scrapers,The end system of the scraper supports at the outer groove of what net mould； The characteristic of this case is in what: the head is made of a pedestal and front cover； Wherein pedestal system forms an annular solid,And what side and body are pivotally connected,What outside front ends and pedestal are pivotally connected the pedestal again,So that general maintenance,The work such as cutter and maintenance are adjusted,It does not need to open entire head,Only need to open front cover can exact operations,Therefore using it is upper relatively commonly use it is more convenient,Safety,Do not take up space and save cost.一種「顆粒成型機之結構改良」，主要在機體一側設有傳動馬達帶動內部擠壓材料的壓輪機構，能在網模內旋動，並在機體的前方設有一機頭，該機頭之周側設有數個刮刀，該刮刀的末端係抵於網模的外環槽處；本案之特徵在於：該機頭係由一基座及前蓋所構成；其中基座係形成一環形體，並於一側與機體樞接，該基座又於外側前端與基座樞接，使得一般的保養、調整刀具及維修等工作，並不需要將整個機頭打開，僅需要打開前蓋即可準確操作，因此使用上較習用更為便利、安全、不佔空間及節省成本。
