In a fishing reel, loosening of a screw ember for fixing a handle arm to a handle shaft is prevented. This fishing reel is provided with a handle shaft (8), a handle arm (10), a nut member (12), and a stopper (24). The handle shaft (8) has a gear portion (15) in a tip portion. The handle arm (10) has a long hole (10c) where the handle shaft (8) is hung and the handle shaft (8) can be fixed at any position along the long hole (10c). The nut member (12) has a female screw portion (21c) that is screw-coupled with a male screw portion (16) of the handle shaft (8) and the handle arm (10) is mounted on the tip portion of the handle shaft (8). The stopper (24) is disposed in the nut member (12) and can have a first posture in which the stopper (24) is hung on the gear portion (15) of the handle shaft (8) so that rotation of the nut member (12) in a release direction can be prevented and a second posture in which the hanging on the gear portion (15) is released so that the rotation of the nut member in the release direction is allowed.COPYRIGHT KIPO 2015낚시용 릴에 있어서, 핸들축에 핸들 암을 고정시키는 나사 부재가 풀리는 것을 방지한다. 이 낚시용 릴은, 핸들축(8)과, 핸들 암(10)과, 너트 부재(12)와, 스토퍼(24)를 구비하고 있다. 핸들축(8)은 선단부에 기어부(15)를 가진다. 핸들 암(10)은, 핸들축(8)이 걸어맞추어지는 긴 구멍(10c)을 가지고, 핸들축(8)을 긴 구멍(10c)에 따른 임의의 위치에서 고정 가능하다. 너트 부재(12)는, 핸들축(8)의 수나사부(16)에 나사결합되는 암나사부(21c)를 가지고, 핸들 암(10)을 핸들축(8)의 선단부에 장착한다. 스토퍼(24)는, 너트 부재(12)에 설치되고, 핸들축(8)의 기어부(15)에 걸어맞추어져 너트 부재(12)의 해제 방향의 회전을 금지하는 제1 자세와, 기어부(15)와의 걸어맞춤이 해제되어 너트 부재의 해제 방향의 회전을 허용하는 제2 자세를 취할 수 있다.