The claimed utility model refers to smoking plants. The smoke generator consists of a body (1) and a settler (2). In the case (1), the combustion of wood material takes place. The housing (1) comprises a chip cover (12), an ignition port (11) and a bottom (9). The bottom (9) is fixed to the body (1) by means of a nut (10). Removable bottom is designed to remove the residue of the combustion product. The sump (2) is connected to the body (1) by means of a connecting pipe (3). The connecting pipe (3) is welded to the bottom of the clarifier (2). The connecting pipe (3) is inserted into the housing (1) through the hole in the wall at the bottom and fixed to the opposite wall by means of a plug (14). The sump (2) contains in the upper part the air inlet (5) and the smoke outlet (4). The compressor (6) is connected to the air inlet (5) through the tube (7). The connecting pipe (3) contains holes directed downwards to the bottom, for passage of smoke (15) from the housing (1) to the sedimentation tank (2). Upon entering the clarifier (2), the cooled smoke condenses, and moisture saturated with carcinogens settles on the walls. Excess moisture can be removed through a drain hole with a plug (8) in the bottom of the sump. Purified smoke comes from the sump (2) through the smoke outlet (4) into the smoking chamber. 2 yl. Purified smoke comes from the sump (2) through the smoke outlet (4) into the smoking chamber. 2 yl. Purified smoke comes from the sump (2) through the smoke outlet (4) into the smoking chamber. 2 yl.Заявляемая полезная модель относится к коптильным установкам. Дымогенератор состоит из корпуса (1) и отстойника (2). В корпусе (1) происходит процесс горения древесного материала. Корпус (1) содержит крышку для внесения щепы (12), отверстие для розжига (11) и дно (9). Дно (9) закреплено к корпусу (1) при помощи гайки (10). Съемное дно предназначено для удаления остатков продукта горения. Отстойник (2) соединен с корпусом (1) при помощи соединительного патрубка (3
