the subject of the invention is a multifunctional machine to work the garden called the \"garden technical harvester\". it links the four functions, namely.mowing mechanical removal of weeds, weeds using liquid herbicide and spread material powdery (seeds, fertilizers, salt, sand).the machine is built with the body (6) is embedded on four wheels. it has two independent motors.one is a propulsion device, a second drive knife cutter or phillips mechanically to remove weeds. the second works in two modes, i.e. wolnoobrotowym and szybkoobrotowym.mode should be included in the case of use functions wolnoobrotowy mechanical removal of weeds, and lawn mowing should be switched on szybkoobrotowy engine mode.the machine operates by directing it through a two-piece handle (12), which are the levers for actuating propulsion device and propulsion wheel knife or phillips.in addition, in the upper right portion of the control panel (14) is located, where the buttons to set the operating mode of engine and pump.in the front part of the body is the container (8) for the liquid herbicide. the tank that is connected over a, combined with nozzles placed underneath the torso.the nozzles spray the herbicide to weeds.in the case of mechanical removal of weeds, apply krzy\u017cak, equipped with four steel rope plaited, which through the friction on the surface of the concrete, to remove weeds zarastaj\u0105ce pavement.the machine is used in the mowing reprovingly side. in the rear part of the device is a seeder (2) used to spread material powdery.inside this siewnika is stirrer, propelled by gearing cierno - ratio, the transmission of rear left wheel device for stirring.performance can be adjusted by extending and have spread zw\u0119\u017canie holes, located in the lower part of the siewnika.thanks siewnikowi, in addition to the above functions, harvester garden successfully may serve also to sown grass, fertilisation,and even to rozsypywania salt and sand on the sidewalks or internal ro
