1. atraumatic cannula for lifting a filament, comprising a hollow needle fixed in a hollow end of the non-working base, an inner diameter not less than the inner diameter of the needle, and the dimensions are sufficient to secure the base of the hand fingers, with the working end of the needle is designed as a sharpened tip with a conical outer surface, and the outlet opening is formed at the top of the needle at its side surface, the edges of the holes downstream from the end of the needle formed by a sloping cut on the cylindrical part of the tip of the needle in the direction of the longitudinal planar slice tip and longitudinal faces in the hollow portion of the needle and the flat cut radially to the axis of the needle, and the longitudinal plane of the cut is made into the needle tip inclined surface in contact with the inner surface igly.2. Atraumatic cannula for lifting a filament according to Claim. 1, characterized in that the angles of inclination to the axis of the needle cylinder by oblique cutting of the needle tip, and an inclined surface formed by the longitudinal cut flat tip inside the needle, is approximately 30 ° .3. Atraumatic cannula for lifting a filament according to claim. 1, characterized in that the longitudinal section of the flat tip made by igly.4 axis. Atraumatic cannula for lifting a filament according to Claim. 1, characterized in that the longitudinal length of the flat tip is cut according to the size of the needle and approximately 1 mm bolshe.5. Atraumatic cannula for lifting a filament according to Claim. 1, characterized in that the flat surface is formed radially to the axis igly.6. Atraumatic cannula for lifting a filament according to claim. 1, characterized in that the hollow is based1. Атравматичная канюля для нитевого лифтинга, включающая в себя полую иглу, закрепленную нерабочим концом в полом основании, внутренний диаметр которого не меньше внутреннего диаметра иглы, а размеры достаточны для надежной фиксации основания
