In the case of bean sprouts growing for small-scale cultivation, in the past, a manual cultivation device which directly supplies water by a person's hand was used. However, this requires irregular water supply at intervals of 1 to 2 hours, The bean sprouts can not be cultivated. As a result, the feeder 1 with the drainage control valve 3 is positioned at the upper end of the present invention, And a water receiving tube 4 for receiving and temporarily storing the discharged water is used. The water receptacle 4 is inverted triangular in shape with its lower portion narrower and its upper portion wider, and both sides thereof supported by an axis so as to be rotatable up and down. In addition, a weight 4c is attached to the lower part of the water receiving case 4 so that the center of gravity is located below when water is not stored, and the center of gravity So that the water is dropped downward and the water receiving container 4 is returned to the inverted oval shape. The water premixes (5) are installed under the water receiving basin (4) so that the dropped water is sprayed to the bean sprouts cultivation basin (6) located below through the water premixes (5). Below the water premix (5), the bean sprouts cultivation pail (6) is located, and is constructed in a structure that can be stacked in multiple stages. The last step consists of the water tank 7, in which the water dropped at the top is finally reached and recovered.소량 재배를 목적으로 한 가정용 콩나물 재배기의 경우 과거에는 직접 사람의 손으로 물을 주는 수동식 재배장치를 이용하였으나, 이는 1~2시간 간격으로 급수해야하는 번거로움으로 불규칙적인 물공급을 야기하여 콩나물의 생육부진을 초래하게 되어 결국 콩나물 재배에 실패한 경우가 많아 이를 보완하고자 안출된 고안으로, 본 발명품의 상단부에는 급수통(2a)을 지지하고 배수조절밸브(3)가 부착된 급수대(1)가 위치하고, 그 내부에는 배수된 물을 받아 일시적으로 저수하는 물받이통 (4)을 적용한다. 물받이통(4)은 역삼각형 형태로 하부는 좁고 상부는 넓게하며, 상하로 회전할 수 있도록 양측면은 축으로 지지한다. 또한, 물받이통(4) 하부에는 중량체 (4c)를 부착하여 물이 저수되지 않을 때는 무게 중심이 하부에 있도록 하며, 만수시 무게중심이 상부로 이동하면서 양측면의 축(4b)을 기준으로 회전하면서 물이 아래로 투하되고 물받이통(4)은 역삼각형태로 원위치되도록하는 것을 특징으로 한다. 물받이통(4) 아래는 물조루(5)를 장착하여 투하된 물이 물조루(5)를 통하여 아래에 위치한