The design is a resonant coil structure.The utility model is composed of a low resistance metal wire wound into a coil within the limited range of a circle or an ellipse.And the two ends of the metal wire are respectively provided with inter phase separation,The first connecting end and the second connecting end are respectively extended vertically downward and vertically upward.At the same time, the metal conductorAt least two adjacent emitting layers are formed by winding between connecting ends.Each emitting layer has four continuous curved divergent segments.In addition, the divergent segments of the same launch layer are interleaved in order at the central point.The outer edges of the divergent segments do not overlap each other.And the divergent segment of the launch layer is located between two adjacent divergent segments of the adjacent launch layer.And the two outer edges of the divergent section of the emitting layer and the corresponding outer edges of the two divergent sections of the adjacent emitting layer overlap and cross each other.In this way,The divergent segments in the relative plane form independent spatial dimensions.And the divergent segments of the upper layer and the lower layer form overlapping intersections.Make each independent spatial dimension intersect with the adjacent spatial dimension at the same time.And by the principle of interference involved,The connected wave frequency generator is used to adjust the two cross waves to be in phase at this point.Furthermore, the interference wave can produce the maximum amplitude effect.本創作係一種共振線圈結構，其係由一低電阻之金屬導線在一圓形或橢圓形之限定範圍內纏繞成一線圈，而該金屬導線兩端分別具有相間隔、且分別垂直往下延伸及垂直往上延伸之一第一連接端及一第二連接端，同時該金屬導線於第一、二連接端間繞曲形成有至少兩層相鄰之發射層，且各發射層分別具有四個連續曲繞之發散段，且同一發射層之發散段除於中心點依序交錯外、各發散段的外側緣互不重疊，而該發射層的發散段則位於相鄰發射層的兩相鄰發散段間，且該發射層之發散段兩外側緣與該相鄰發射層之兩發散段對應外側緣相互重疊交叉，藉此，線圈中呈相對面的發散段分別形成獨立的空間維向，且上層發射層之發散段與下層發射層的發散段分別形成有重疊交叉點，使各獨立的空間維向分別要同時和相鄰的空間維向交叉，而藉著涉的干涉原理，並利用連接之波頻產生器調整兩交叉波在該點同相，進一步可讓干涉波產生最大的振幅效果。
