1. This breeding box unit, with layers of overlapping dimensional up and extended into a lattice of a lattice pattern on both sides, each cultivation a few aquatic (shrimp, crab, clams, ...) in order to increase space usage, and can be used in indoor animals organic breeding, to prevent outdoor pollution sources.2. design of siphon drainage in each unit, emissions per unit of water going down a level.3. on the top cycling filtered water out from the pipe when water flow is small, siphon will not happen. water in box movement in order to maintain the amount of dissolved oxygen in the water.4. when water flow is large, Above the water in the drain pipe swirls. air out between the outer cover and drainage pipe. then the water siphon, the water drain increase. the be left feed and feces at the bottom of the box will go down a layer. the water level will drop to the lowest level, namely siphon break hole location.5. Also using the siphon principle, when siphon drainage occurs, increase in water flow and can feed of aquatic products, down emissions, spread to every culture, achieve the purpose of auto-feeding.1. 將此養殖箱單元,用層層相疊的立體方式,向上及兩旁擴展成一格一格的模式,每一格中飼養幾隻水產品(蝦、蟹、蛤...),以增加空間的使用率,並可在室內工廠化有機養殖,杜絕室外各種污染源。2. 在每單元內設計一虹吸排水頭,將每單元的水往下層排放。3. 最上方架設循環過濾後之出水管,當出水流量小,虹吸現象不會發生,讓水在箱體間流動,以維持水中溶氧量。4. 當出水量大時,水會在內部排水管上方產生漩渦,漩渦會將內部排水管與虹吸排水頭外蓋間的空氣抽出,使水流產生虹吸現象,排水量大增,將盒體底部的殘餘餌料,水產品排泄物往下層抽吸,水位會下降至最低水位,即虹吸破除孔位置。5. 同樣運用虹吸原理,當虹吸排水現象產生時,水流量大增,可以將水產品的餌料,往下層排放,散佈至每個養殖盒,達到自動餵食的目的。(1)‧‧‧箱體(2)‧‧‧虹吸排水頭外蓋(3)‧‧‧虹吸破除孔(4)‧‧‧底部吸水孔(5)‧‧‧內部排水管(6)‧‧‧下部排水管
