Disclosed is a method of applying bulk glue for a nursing pad base film to four corners of a sanitary product nursing pad base film, comprising the following process steps: (a) gluing and conveying release paper (100) (b) cutting the glued release paper (100) and (c) moving the block of the release paper to which glue is adhered. Also disclosed is a device for implementing the method of applying bulk glue for a nursing pad base film to four corners of a sanitary product nursing pad base film, comprising a pair of rubber rollers (2.1, 2.2) used for pulling a release paper roll (1) an automatic unrolling electric motor used for making the release paper roll (1) independently unroll an automatically controlled glue gun (3) for intermittent gluing of the release paper (100) during the conveyance process a flat adsorptive conveyor belt used for conveying the glued release paper (100) to the next procedure a chisel blade (5.1) and a blade roller (5.2) used for rotationally cutting the glued release paper (100) and a compression roller (6) provided above the chisel blade (5.1). The peel-off strength of the bulk glue applied to the nursing pad base film by the method or device can reach 20 N or even higher, the width thereof can reach 60 mm-450 mm, and the length thereof can reach 120 mm-1000 mm, preventing the nursing pad from moving, wrinkling, and folding, etc., during use. The production speed of a nursing pad machine station normally reaches 120-180 metres/min, meeting the market demands on industrialised production of bulk glued nursing pads.Linvention concerne un procédé dapplication de colle en vrac pour un film de base de coussinet dallaitement aux quatre coins dun film de base de coussinet dallaitement de produit hygiénique, comprenant les étapes de traitement suivantes : (a) coller et transporter un papier antiadhésif (100) (b) couper le papier antiadhésif collé (100) et (c) déplacer le bloc du papier antiadhésif auquel la colle est amenée à adhérer. Linvention c
