This is about a three-dimensional planting device.The utility model comprises: a support tube and a planting basin；The inner diameter of the upper end of the support pipe is slightly larger than the outer diameter of the lower end of the support pipe.And form a set of joints.A plurality of longitudinal positioning slots are arranged on the inner side of the socket part.And at least a certain rib is arranged on the outer side of the lower end nozzle of the support pipe.A diaphragm is arranged in the pipe of the support pipe.In the center of the partition is an overflow pipe which is located in the middle of the socket.And the upper part of the support pipe is provided with several hanging holes on the pipe body above the diaphragm.In addition, the pipe body of the lower part of the support pipe is provided with a fixing hole opposite to the longitudinal position of the hanging hole；The basin body on one side of the planting basin is provided with a hanging bolt and a fixing bolt.The upper hanging bolt is provided with an inlet hole through to the planting basin.The lower fixing bolt is also provided with a drainage hole through to the planting basin；The supporting pipes can be connected with each other.And each support pipe can be equipped with several planting basins.In order to form a vertical three-dimensional planting basin group,To increase the planting area.本創作係有關一種立體植栽裝置，其包含有：支撐管及種植盆；該支撐管上端管口之內徑較支撐管下端管口之外徑略大，而形成一套接部，於套接部之內側面設有數個縱向定位槽，而於支撐管下端管口之外側面上至少設有一定位肋，支撐管之管內設有隔板，該隔板之中央設有一立於套接部中間之溢流管，而支撐管之上半段於隔板上方之管體上設有數個上掛孔，另於支撐管之下半段之管體上設有與上掛孔縱向位置相對之下固定孔；該種植盆一側之盆體上設有一上掛栓及一下固定栓，該上掛栓上設有貫通至種植盆內之進水孔，而下固定栓上亦設有貫通至種植盆內之排水孔；支撐管可多支相互套接，且每一支撐管上可裝掛數個種植盆，藉以組成垂直立體狀之種植盆組，達增加可種植之面積者。
