In some examples, a trap to electrocute a pest may include a logic board. The logic board may create an open circuit using two electrical contacts in touch with two conductive plates in a container located in the trap. A pest entering the container may touch the two conductive plates, causing the circuit to close. Based on determining that the circuit was closed, the logic board may determine that a pest entered the trap. The logic board may cause a shutter inside the trap to move from an approximately horizontal position to an approximately vertical position, thereby causing a portion of a door of the container to close by causing two latch strikes of the door to engage with the two jaws of the container. The circuit may send a wireless notification message, indicating that the pest was captured in the container, over a wireless network to a computing device.
