PURPOSE: The human body, or the funeral procedure in which the far infrared rays, the negative ion etc. are vented in oblique and creating the good surrounding environment is finished. The surrounding environment of the repository apartment is created to park and it can utilize. CONSTITUTION: A funeral method by the aluminum pipe(10) is as follows. The side in which up and down vertical plate and bottom plate (non illustration) meet is welded to the argon welding and the lower tube of bilaminar is formed. In right and left side, since welding the side which each other hits including left and right side board(31), the front back plate(32) and cover plate(33) etc. to the argon welding, the pipe lid(30) is formed. The bioceramics floor material is spread on the snuggly protrusion of the inside floor surface of the lower tube manufactured to the aluminum panel material and oblique is placed in the upper part. The lower tube is covered within the pipe lid and lower tube with the pipe lid spreaded outside to the inorganic ceramic same coating material and it covers with. The lower tube and pipe lid are coupled with the screw spike(35). The repository apartment is established and the aluminum pipe is transferred to the repository apartment. The aluminum pipe is transferred to the repository apartment of the aluminum pipe for safekeeping and it buries in repository. The white cement and water are mixed to the fixed rate modulus and it finalizes so that the wall of the finishing material and repository and gap have no and the aluminum pipe is safekept.본 발명은 친환경성 확보를 위한 사체보관용으로 하부관(棺)과 상부관으로 구비되고, 3㎜두께의 알미늄판재로 형성되는 알미늄 관(棺)의 내,외를 기능성 재료에 의거 조성하는 기술에 관한 것으로 더욱 상세하게는 내,외부의 표면은 무기계 도포제를 도포한 기능성 알미늄관(棺)(이하 "알미늄관(棺)"이라 한다)을 조성하고, 상기 알미늄관(棺) 내부에 사체를 안치하기 위한 알미늄 판재로 제작되는 하부관(20)의 바닥면에는 원적외선과 음이온 등이 방출 되도록 바이오 세라믹계 명반석, 제올라이트, 활성탄(숯/흑연질계) 등을 일정비율로 혼합하여 고강도 고화제를 사용하여 일정한 두께, 폭, 길이를 갖는 판재형태로 압착 성형시킨 바이오 세라믹 바닥재(25)를 부설하고 사체를 안착시킨 후, 상부관(30)의 상부에는 제올라이트 등 정화물질이 충진된 환기구가 구비되
