PURPOSE: A distributor for thermal fogging equipment is provided to facilitate moving to a site and installing afterward by being composed of a rubber shield plate, auxiliary shield plate, and a guide connecting pipe. CONSTITUTION: A distributor for thermal fogging equipment includes a guide connecting pipe(100), a rubber shield plate(200), and an auxiliary shield plate(250). The guide connecting pipe includes a connecting pipe body and a stainless pipe(150). The connecting pipe body has the shape of a trumpet formed with a silicon material. The stainless pipe is assembled at the upper part of the connecting pipe body. The rubber shield plate is assembled with the guide connecting pipe, and has the shape of a rectangle, square, or a circle covering the upper part of a manhole cover. The auxiliary shield plate is capable of covering the adjacent manhole covers. The rubber shield plate is inserted into an insertion part(120) formed at the lower outer circumferential surface of the guide connecting pipe through an insertion hole(210) punctured at the center. A spray pipe of usual thermal fogging equipment is assembled at the upper part of the guide connecting pipe. A single-silled ring groove is formed inside the connecting pipe body. The stainless pipe is pressed to the upper interior surface of the connecting pipe body, and the upper flanges of the both and the upper flange of the guide connecting pipe are assembled by riveting. The original shape of the guide connecting pipe is thus prevented from being transformed during the assembly of the spray pipe of the usual thermal fogging equipment.본 발명은 간편하게 중앙에 위치하는 맨홀의 뚜껑 상부에 덮여지는 차단막 고무판과 상기 중앙의 맨홀 양측에 하수관이나 우수관으로 연통된 양측의 맨홀의 뚜껑 상부에 덮혀지는 보조차단판을 설치한 상태에서 상기 차단막 고무판의 끼움공에 연막소독기의 분사관이 결합하는 가이드 연결관을 조립하여 사용이 가능하여 맨홀의 뚜껑 형상에 맞는 차단막 고무판과 보조차단판의 교체 사용에 의해 맨홀의 뚜껑 형상에 구애받지 않고 분사되는 연막소독액의 손실을 최대한 방지하면서 효과적인 소독능률을 제공하는 것을 특징으로 한다.
