There is provided a glucose monitoring method and apparatus based on the principle of Wavelength-Modulated Differential Laser Photothermal Radiometry (WM-DPTR). Two intensity modulated laser beams operating in tandem at specific mid-infrared (IR) wavelengths and current-modulated synchronously by two electrical waveforms 180 degrees out-of-phase, are used to interrogate the tissue surface. The laser wavelengths are selected to absorb in the mid infrared range (8.5-10.5 μm) where the glucose spectrum exhibits a discrete absorption band. The differential thermal-wave signal generated by the tissue sample through modulated absorption between two specific wavelengths within the band (for example, the peak at 9.6 and the nearest baseline at 10.5 μm) lead to minute changes in sample temperature and to non-equilibrium blackbody radiation emission. This modulated emission is measured with a broadband infrared detector. The detector is coupled to a lock-in amplifier for signal demodulation. Any glucose concentration increases will be registered as differential photothermal signals above the fully suppressed signal baseline due to increased absorption at the probed peak or near-peak of the band at 9.6 μm at the selected wavelength modulation frequency. The emphasis is on the ability to monitor blood glucose levels in diabetic patients in a non-invasive, non-contacting manner with differential signal generation methods for real-time baseline corrections, a crucial feature toward precise and universal calibration (independent of person-to-person contact, skin, temperature or IR-emission variations) in order to offer accurate absolute glucose concentration readings.
