PURPOSE: A planter is provided to supply water continuously and evenly in the whole planter at any height without constructing a separate wall watering system.CONSTITUTION: A planter main body(110) has a water inlet(111) on the top and a water drainage(112) on the bottom. A water storage(120) stores water and falls overflown water. A first vegetation part(130) is filled with vegetation soil(101) and arranged between multiple water storages. The outer section of the first vegetation part has water permeability. A second vegetation part(140) is filled with vegetation soil and separated from the lower inner wall of the planter main body. A water flow inducing part(150) induces falling water from the water storage due to the overflow into the next water storage and have the water stored in the next water storage. A first storage partition wall(121) is separated from the rear inner wall of the planter main body. The right and the left parts of the partition wall are tightly fixed to the right and the left inner walls of the main body. A second storage partition wall(122) transmits water stored in a water storage space which is formed between the first storage partition wall and the second storage partition wall. The upper end of a first vegetation partition wall(131) is connected to the lower end of the first storage partition wall. A second vegetation partition wall(132) forms a vegetation soil storage space between the first vegetation partition wall. A first vegetation partition wall(141) of the second vegetation part is identical to the first vegetation partition wall of the first vegetation part. A second vegetation partition wall(142) of the second vegetation part is solid unlike the second vegetation partition wall of the first vegetation part which is a net shape.COPYRIGHT KIPO 2013벽면 조경용 플랜터는 플랜터 본체와, 복수의 물 저장부들과, 적어도 하나의 제1 식생부와, 제2 식생부, 및 물 흐름 유도부들을 포함한다. 플랜터 본체는 내부에 공간을 갖고 전면부가 개구된 형상을 가지며, 상면부에 입수구가 형성되며, 하면부에 배수구가 형성된다. 물 저장부들은 물을 저장하고 오버플로우된 물을 자유 낙하시키도록