PROBLEM TO BE SOLVED: To provide a small and quiet excreta-handling device, regardless of the stool nature of a care-needed person, the device can reliably process the excreta of the care-needed person to eliminate discomfort and reduce the burden of caregivers. SOLUTION: In this excreta-handling device, a suction circulation tube 50 is led from the discharge side of a suction motor (31) to a cooling unit 55 provided on the outside of the apparatus-housing box 12 and the suction circulation tube 50 is cooled inside the cooling unit 55 by heat exchange with external air and then led to a return box unit 27. Also, a stool sensor 13 is constituted by a sensor for sensing the stool hardness, the sensor is used to control in such a way that intake will be set to have a stronger suction force upon sensing a higher signal of the stool hardness, a urine sensor 14 is constituted by a sensor having two contact points, the sensor is used to control the required suction force in response to the signal intensity. Furthermore, the suction motor 31 inside the suction motor unit 24, cooling fan 32 and filter 33 are covered by damping material made of highly rigid material, and placed on an anti-vibration table processed with anti-vibration materials, and fixedly suspended by an anti-vibration spring 79.提供一種排泄物處理裝置,該裝置係不論需要看護者之便的性質,都可確實地處理成消除不舒適感,又減輕看護者之負擔,而且小型、噪音亦小。在排泄物處理裝置,將吸入循環管50從吸入馬達31的排出側導出至機器收容盒12之外部的冷卻單元55,並在冷卻單元55內與外氣進行熱交換而冷卻後,回到回流盒單元27。又,大便感測器13係由偵測大便之硬度的感測器所構成,該感測器係用以控制成以大便之硬度愈高信號愈強的吸入力設定吸入,小便感測器14係由具有2點接點之感測器所構成,該感測器係用以控制成因應於信號之程度算出所需的吸力。進而,吸入馬達單元24內之吸入馬達31、冷卻風扇32及過濾器33係以高剛性材料之制振材料包覆後,載置於以防振材料所加工之的防振台上,並以防振彈簧79懸吊固持。10‧‧‧尿片杯本體11‧‧‧軟管單元12‧‧‧機器收容盒13‧‧‧大便感測器14‧‧‧小便感測器15‧‧‧污物吸入軟管16‧‧‧微風軟管17‧‧‧微風軟管18‧‧‧回流空氣軟管19‧‧‧部分排出軟管20‧‧‧洗淨水軟管21‧‧‧微風排出軟管22‧‧‧污水槽單元23‧‧‧淨化處理單元24‧‧‧吸入馬達單元25‧‧‧供水單元27‧‧‧回流盒單元28‧‧‧除霧過濾器29‧‧‧除臭過濾器30‧‧‧殺菌過濾器31‧‧‧吸入馬達32‧‧‧冷卻風扇33‧‧‧過濾器34‧‧‧冷卻風取入口35‧‧‧冷卻風排出口36‧‧‧洗淨水槽37‧‧‧輔助槽38‧‧‧溫水槽39‧‧‧送水泵40‧‧‧安全槽41‧‧‧水位感測器42‧‧‧水位感測器43‧‧‧溫度感測器44‧‧‧加熱器45‧‧‧溫度感測器46‧‧‧閥47‧‧‧排水管48‧‧‧微風馬達
