UNIWERSYTET MIKOŁAJA KOPERNIKA W TORUNIU;INSTYTUT HODOWLI I AKLIMATYZACJI ROŚLIN-PAŃSTWOWY INSTYTUT BADAWCZY
发明人:
KRZYSZTOF SKOWRON,GRZEGORZ GRYŃ,JOANNA KWIECIŃSKA-PIRÓG,KATARZYNA GRUDLEWSKA,EUGENIA GOSPODAREK-KOMKOWSKA
申请号：
PL127807
公开号：
PL127807U1
申请日:
2018.11.21
申请国别(地区):
PL
年份:
2020
代理人:
摘要：
The utility model shall be a hermetic chamber for assessing the effectiveness of microbiocidal methods of air hygiene and the efficiency of ordering disinfectant solutions under laboratory conditions. The chamber is a rectangular diamond whose side walls (1) and back walls (2) are made of one curved sheet at a straight angle and have a vertical cross-section (3) on the side walls (1),and two coatings on the back wall (2),and edges, lower and upper back walls (2),are bent outwards, at a straight angle, forming a mounting collar to which, by means of a screw connection, the lower (8) and upper (9) walls are attached,with connections sealed with a neoprene seal (10),and the side edges of the side walls (1) are bent at a straight angle, outside, forming a mounting collar (11) sealed with a neopren e seal,connected by screws (17) to the front wall,which is a rectangular plate located in the shoulder with holes, the frame being attached to the chamber by means of the seals on the sides of the lower wall (8) and the upper wall (9),and in the side wall (1) is a revision hole (21) closed by a plate with screws (25) with butterfly screws, protected from the inside by a rubber curtain (22),And outside, a neoprene seal,below is a clamp handle (29) and a hose (30) leading to, and on the opposite side wall, an electric socket (28) with a wire (33) is located at the bottom,where the tube (33) and the hose (30) are sealed with rubber stoppers, a UV-C 27 lamp is mounted on the upper wall (9) of the chamber and fans are mounted on the threaded rods (31) on both sides of the chamber (32).Przedmiotem wzoru użytkowego jest hermetyczna komora do oceny skuteczności mikrobiobójczej metod higienizacji powietrza oraz efektywności zamgławiania roztworami środków dezynfekcyjnych w warunkach laboratoryjnych. Komora ma postać prostopadłościennej bryły, której ściany boczne (1) i tylna (2) wykonane są z jednego zagiętego pod kątem prostym arkusza blachy i mają na ścianach bocznych (1) pionowe prz
