The tractors PTO is designed joints and connections of the PTO joint rotational force of the rotating rotor to the other side end in contact with the rotating rotor from the connection link for delivering to the installation the cast joint and the adjuster, since the rotating joint on the PTO joint in contact with one side end, the adjuster cast joint is installed at the other side end of the connecting link also to control the rotor rotation angle from left and right, as well as when the operation is stopped by the reverse rotation of the PTO joint joints installed at one side end of the connecting link connected to the link is not to be rotating by rotating the a connecting link produced in accordance with twisted or bent, with a gear in the gearbox, rotation of the inner rotor to prevent the breakage of the power transmission link will house the initial rotating rotor. An input shaft (20) and that the output torque of the PTO of the tractor is on one side of this joint is designed for achieving the object (2) it is connected via the PTO and the coupling joint (2) And a connection link 30 for transmission to the one side, the input shaft is connected to the other side of 20 the rotational force transmitted from the rotor rotational shaft 20 (50) In the initial home made of the output shaft 40 is connected to the one side and the other side of the connecting link 30 it is transmitted to the connecting link 30 to rotate the rotational force transmitted from the rotor 50, the input shaft 20 the frame is installed to pass through the through hole 12 of the joint bracket (11) of the "U-shape, which is installed at the bottom of 10, the other side of the connecting link 30 is a side ends the input shaft 20 is connected to the rotating joint 31 and the other side end is connected to the output shaft 40 and the adjuster cast joint (32) to the PTO joint (2) rotating the rotor through a rotational force to the output shaft 40 from the 50 is configured to be delivered.본 고안은
