A useful model refers to agriculture, in particular to devices for fertilizing and planting garlic. An ČSN planter consists of a frame 1, on each side of which there are wheels 2, allowing to roll a planter across the field. To connect the planter to the tractor, a trailing mechanism 3 is provided on the front of the frame 1. In the middle of the frame 1 there is a drum 4 made in the form of a circular cylinder with several rows of scoops 5 for garlic, each successive row of sampling spoons 5 located lower than the previous one, the size and depth of each spoon 5 depends on the size of the teeth of the inoculated garlic (small fraction of garlic: up to 12 mm, average fraction: 13-16 mm, coarse fraction: over 16 mm). The seed hopper 6 for garlic cloves, also fixed to the frame 1, is brought to the drum 4, and the side of the garlic clove hopper 6, (not more than 5 mm.) and sufficient for unobstructed rotation of the drum 4 with the intake spoons 5, as well as in the upper part of the frame 1, metal spermabrasins 7 are welded (one on each each row of spoons 5) repeating the round shape of the drum 4, with the metal seminal duct 7 being mounted relative to the drum 4 in such a way that each row of spoons 5 moves to the receiving opening of the metallic vas deferens 7. At the end of Each funnel 8 contains a funnel 8 (where a garlic seed enters), which is connected by means of a flexible vial 9 with a vomer 10 welded to the front of the frame 1. Additionally, a container 11 for applying soluble fertilizers is fixed in the upper part of the frame 1, made of a polymeric material and connected to the openers 10, via the means of the pipeline 12 with the shut-off valve 13 (the flow rate of the amount of the fertilizer to be added is metered by the selection of the diameter of the tube). In addition, small bunkers 14 are placed on the front of frame 1 for air bulbs of garlic or bulk fertilizers through which shaft 15 with rigidly mounted gears 16 serves to grasp bulbs of garl
