PROBLEM TO BE SOLVED: To solve a problem in which, if a fishing line guide which has a mounting tube and which needs strength is formed in a single frame, the guide frame and the rod mounting tube are not firmly fixed.SOLUTION: In the hooking hole 31, the insertion port 29 is formed to face the far end of the axis direction and the projection 33 to be embraced is formed at the inner edge of the radial direction of the insertion port 29. The bending parts 15 and 17 are formed in the tip part of the insertion piece 13 and the tip part is inserted from the insertion port 29 into the hooking hole 31 of the rod mounting tube 19 to fit the bending part 17 to the projection 33 to be embraced. After that, the line guiding ring 5 is pulled up to make the tip part fit the recessed part 23 on the rod body 21. Thus attached, the tip part of the insertion piece 13 is fixed embracing the projection 33. Consequently, the insertion piece 13 does not sway and is prevented from falling off.COPYRIGHT: (C)2011,JPO&INPIT【課題】強度を要求される筒状装着方式の釣糸ガイドを、1枚のフレームで構成すると、ガイド枠と竿体装着筒を強固に固定する事が出来なかった。【解決手段】係合穴部31は、差込み口29が軸方向他端側を向き、且つ差込み口29の径方向内方の縁には抱え込み用凸部33が形成されている。差込み片13の先端側に折曲部分15、17を形成しておき、竿体装着筒19側の係合穴部31に差込み口29から先端部を押し込んで抱え込み用凸部33に、折曲部分17を沿わせる。その後、導糸環部5を引き起こし、筒本体21上の嵌合凹部23に嵌合させる。このように組付けると、差込み片13は、差込み片13の先端部は抱え込み用凸部33を抱き込んだ状態で掛止される。したがって、差込み片13はぶらぶらせず、抜け止めも阻止される。【選択図】 図6
