The utility model relates to agricultural engineering, in particular to the details of the working bodies of cultivators and sowing complexes. The lancet paw contains V-shaped wings, the nose and chest with a shank, two holes located on the axis of symmetry of the shank, the side ribs of which are smoothly mated with the rear by the ribs of the wings, the center of the radius of bending of the chest and shank is located on the vertical passing through the toe of the paw, which is made of spring-spring steel 65G with a thickness of 6.0-8.0 mm and made whole amplified with heat treatment, the crumbling angle depends on the ongoing agricultural activities and is equal to 14-26 °, the wings of the cutting edge are made with lower sharpening at an angle of 12-18 ° relative to the cross section of the wing of the cutting edge, while the nose is made without sharpening, the thickness of the nose corresponds to the thickness of the paw, surfacing is made on the cutting edge, each hole is made in the form of a square with a chamfer for a countersunk bolt, characterized in that the shank is made without heat treatment and has a hardness of 5-29 HRC, wings and cutting the flanges are heat-treated up to HRC 45-60 units, the angle between the V-shaped wings is 65-75 °, the angle of inclination of the shank relative to the horizontal line is 47-50 °, the dimensions of the mounting holes of the paw are 12.0-13.5 mm with a center distance 44.0-46.0 mm, in the places of attachment of the paw with the cultivator stand, the cross-section of the shank is U-shaped, surfacing on the cutting edge is made of wear-resistant material on the underside. The technical result is an improvement in the fastening characteristics of the lancet paw in the places of attachment of the paw with a rectangular stand wide-spread cultivators.Полезная модель относится к сельскохозяйственному машиностроению, в частности к деталям рабочих органов культиваторов и посевных комплексов.Стрельчатая лапа содержит V-
