The corrugated sheller structure for overturning middle growth according to the present invention is a '∧' shape in which the longitudinal side is three consecutive, and the longitudinal side (2) holes are formed on each of the middle height sidewalls, and the use state '∨' type floor length is shown. In the corrugated sheller main body 1 for overturning, in which four long soles 3 are formed at regular intervals in a direction, a diameter of 40 to 50 mm is projected on the bottom rims at regular intervals on the left and right outer sides of the main body 1 on both sides. A binding protrusion 4 in a semi-groove state having a length of 30 to 40 mm； At the end of the binding protrusion, a 5 * wide 5mm step 4b is formed, and a screw assembling hole 4a is formed in the upper plate of the binding protrusion, and the binding protrusion is formed between the soles 3 formed in the '∨' bottom valley. The lower frame seating grooves for the intermediate overgrowth corrugated shelter structure, characterized in that the lower frame seating groove 6 of the half groove is formed integrally with the screw assembly hole (4a ') at the same interval as the lower frame (only the assembly piece 9) 7) The time for assembling the main body 1 is shortened so that the labor cost is reduced and the binding protrusion 4 and the lower frame 7 are connected using a binding rope 8 or an electric wire tie (not shown). At the same time, the body 1 assembled to the lower frame 7 by fast tidal wave, typhoon, typhoon, etc. are structurally and securely installed so that the main body does not deviate to one side or is detached and applied to the abalones. A useful design to minimize losing stress .본 고안에 따른 전복 중간육성용 파형쉘터 구조는 길이방향 측면이 3 연속된 '∧'형으로 각 중간높이 측벽에 장방향 측창(2) 구멍이 교차 형성되며, 사용상태도시'∨'형 바닥 길이방향으로 장방향 바닥창(3) 4개가 일정간격 형성되는 전복 중간육성용 파형쉘터 본체(1)에 있어서, 본체(1) 양편 최외곽 사면 좌우 일정 간격의 바닥테에 직경 40∼50㎜, 돌출길이 30∼40㎜ 규격의 반홈상태의 결속돌부(4)와； 결속돌부 끝단에 가로*세로 5㎜ 단턱부(4b)가 형성되며, 결속돌부 상부복판에 나사조립공(4a)이 형성되며, '∨'형 바닥골에 형성된
