The utility model relates to a lotus type buncher.It includes: one machine,On one side of the machine is fixed a cloth head rolling rod which can be bent to the lotus bunching mechanism.The machine is equipped with a motor.Reducer and a lotus bundle mechanism,The lotus bundle mechanism consists of several kneading pieces.Upper joint seat,Lower fin seat,Lower joint seat,The elbow group,Movable seat,Intermediary seat,Pulley,Digital link guide rod,Movable rodPressure cylinder and other components,And a longitudinal fin part is arranged at the back of the rolling sheet.The lower end of the fin part and the upper part,The lower combined base is clamped and fixed with the lower fin base pivoted.At the other end of the fin part is pivoted with the elbow set fixed on the movable seat.The movable seat can be raised and lowered by the movable rod controlled by the pressure cylinder.Make the rolling piece close and open.And the movable seat is connected with a guide rod through the capacity.One end of the connecting guide rod is arranged at the through hole of the intermediate seat.The locking bolt shall be locked after passing through the belt pulley.The other end receives the upper part after passing through the hole of the movable seat.The bolts of the lower binding seat are consolidated.When the pulley is driven by the reducer,It can be connected by connecting the guide rod.Lower the joint base so that the rolling pieces can rotate at the same time.When the pressure cylinder pushes the movable rod upward, the movable seat will rise.And make the rolling piece close synchronously.And make the tea rolling and contracting bundle stable and synchronous.本新型一種蓮花型束包機，其包括：一機台，於機台一側固設一可向蓮花束包機構彎折之布頭捲布桿，而在機台內容設有馬達、減速機及一蓮花束包機構，該蓮花束包機構係由數個揉捻片、上結合座、下鰭片座、下結合座、數曲肘組、活動座、中介座、皮帶輪、數連結導桿、活動桿、壓缸等構件所組成，而該揉捻片之背後設有縱向鰭片部，該鰭片部下端與受上、下結合座夾設固定之下鰭片座樞連，至於鰭片部另端則與固定於活動座之曲肘組樞連，而能藉由壓缸所操控之活動桿連動活動座之上升與下降，令揉捻片進行閉合及開啟之動作，而該活動座並穿容數連結導桿，該連結導桿一端置於中介座透孔處，而使穿鎖螺栓穿經皮帶輪後予以鎖固，另端在穿經活動座之透孔後受上、下結合座之螺栓所固結，而使皮帶輪受減速機驅動時，可藉由連結導桿
