< Topic > Assembly job it can make simple and quick, raising the casket furthermore with the side board of shorter side side, this side board slips and tries not to have the fact that it rises.Solutions Sabot side board with side board 3 the left and right which has provided on both shorter side side of 2 the front and back which has provided on both long side side of 1 of Nagakata form and this sabot 1 and sabot 1 casket itself 4 is formed in rectangular parallelepiped condition. Having the cover 5 which, closes the surface of aperture condition of this casket itself 4 it forms. Side board side board 3 of 2 of the above-mentioned front and back and left and right, concatenating to sabot 1 with hinge, 6 you fold up and form unrestrictedly. In this case at the same time as for this device, when side board the side board 3 of 2 front and back and left and right being one-touch, simplicity in order to be able to lock quickly, from folding state assembled in standing up condition, side board side board 3 of 2 front and back and left and right is inserted and fit section 7 in order to attach, side board it is desirable to have provided in junction position of side board 3 of 2 front and back and left and right.< Choice figure > Drawing 1【課題】 組立作業を簡単、迅速にでき、しかも短辺側の側板を持って棺を持ち上げても、この側板がずれ上がることがないようにする。【解決手段】 長方形状の底板1と、この底板1の両長辺側に設けている前後の側板2と、底板1の両短辺側に設けている左右の側板3とで棺本体4を直方体状に形成する。この棺本体4の開口状の上面を塞ぐ蓋5を備えて形成する。上記の前後の側板2と左右の側板3とを、底板1に蝶番6で連結して折畳み自在に形成する。この場合本考案は、前後の側板2と左右の側板3をワンタッチで簡単且つ迅速に固定できるよう、折畳み状態から起立状に組立てたとき、前後の側板2と左右の側板3を嵌め付けるための嵌合部7を、前後の側板2と左右の側板3の接合位置に設けているのが好ましい。【選択図】 図1
