Systems and methods for forming a vacuum forming aperture film 50 with fine bends 52 can be disclosed. For example, a polymer web, such as a molten polymer web 10, may be received at a junction 40 between a screen 22 having a positive bend and a roller 32 comprising a surface having a negative depression. The roller 32 may have a diameter of about 5.5 inches or less. The fine bends 52 are formed by inserting a positive bend on the screen 20 into a negative depression on the surface of the roller 32 at a pressure of about 1.5 to about 3.5 pounds per linear inch (PLI) ) On the land of the polymer web. In addition, one or more openings are formed in the polymeric web 10 in close proximity to the fine bends 52 on the land.미세 굴곡부들(52)을 가지는 진공 형성 개구 필름(50)을 형성하는 시스템 및 방법들이 개시될 수 있다. 예를 들어, 용융 중합체 웹(10)과 같은 중합체 웹은 포지티브 굴곡부를 가지는 스크린(22)과 네거티브 함몰부를 가지는 표면을 포함하는 롤러(32) 간의 결합 지점(40)에서 수취될 수 있다. 롤러(32)는 약 5.5 인치 이하의 지름을 가질 수 있다. 미세 굴곡부(52)는 예를 들어, 약 1.5 내지 약 3.5 PLI(pounds per linear inch)의 압력에서 스크린(20)상의 포지티브 굴곡부를 롤러(32)의 표면상의 네거티브 함몰부 내로 삽입함으로써 결합 지점(40)에서 중합체 웹의 랜드 상에서 확장될 수 있다. 이에 더하여, 하나 이상의 개구들이 랜드 상의 미세 굴곡부(52)에 근접하여 중합체 웹(10)에 형성된다.