PROBLEM TO BE SOLVED: To provide a one cane self-standing 3-point support holder that facilitates self standing thereof when walking and when not in use by detachably mounting a self-standing holder in a lower part of one cane that cannot stand by itself.SOLUTION: A trapezoid rear self-standing plate 2 is provided by using solid wood, having the same base size and upper side size of a triangular front self-standing plate 1 with a circled top, and being circularly processed in both lower ends for forming from four sides at any angle to a triangular extension line in left and right. In the trapezoidal rear self-standing plate, a front upper/lower connector 3, 4 and a rear upper/lower connector 5, 6 provided with a connecting hole for connecting a truss small screw 10 with a claw nut 11 in one side are fixed in top and bottom surfaces of the front self-standing plate lower part and in the top and bottom surfaces of the rear self-standing plate upper part, respectively. The front self-standing plate lower part is matched with the rear self-standing plate upper part, and then one side end is hinged with a hinge 7. A hole corresponding to the diameter of a cane shaft is opened by leaving a portion of a front/rear lower connector lower part from the center of the front/rear upper connector. A truss head tapping screw 12 being locked in the cane shaft is provided in the upper connector rear surface center. A rubber leg 8 is screwed with a countersunk-head tapping screw 9 in 3-places of the front/rear self-standing plate top portion lower part.SELECTED DRAWING: Figure 1COPYRIGHT: (C)2018,JPO&INPIT【課題】そのままでは自立不可能な1本杖の下部に自立保持具を着脱可能に装着することにより歩行と不使用時の自立が容易に行え1本杖自立用3点支持保持具を提供する。【解決手段】堅牢な木材を用い、頂部を円加工した三角形の前自立板1の底辺寸法と上辺寸法が同一で左右が三角形の延長線上に対して任意の角度で四辺より形成する下部両端を円加工した梯形の後自立板2において、前自立板下部の上下面と後自立板上部の上下面に、それぞれをトラス小ネジ10と爪付ナット11連結する連結穴を片側に設けた前上下連結具3,4と後上下連結具5,6を固着し、前自立板下部と後自立板上部を合致させ片側端部は丁番7で蝶着する。前後上連結具の中心より杖軸の径に対応する穴を前後下連結具下部の一部を残してあけ、上連結具後面中央には杖軸に係止するトラス頭タッピングネジ12を設け、前後自立板頂部分下部3箇所にはゴム脚8を皿
