in a spool of the dual bearing reel, fishing line, making it difficult to penetrate between the flange and the plate. The spool 12 is a bit between the distal end portion and a first flange portion (12b) and protrudes to the both ends of the outer periphery of the second flange portion (12c), the first annular portion (14a) and a second annular portion (14b) placing a gap is provided, the first fishing line preventing entry to prevent the fishing line from entering in between the first flange portion (12b) and the first side plate 8 and between the second flange portion (12c) and the second side plate (9) and a part (12f) and second line entry preventing part (12g). A first fishing line entry preventing part (12f) and second line entry preventing portion (12g) is provided a couple of a slight gap between the front end portion of the first annular portion (14a) and a second annular portion (14b), first first flange portion (12b) and is arranged to be perpendicular to the outer peripheral surface of the first cylindrical portion (12i) and a second cylindrical section (12k) of the second flange portion (12c).듀얼 베어링 릴의 스풀에 있어서, 낚싯줄이 플랜지부와 측판 사이에 진입하기 어렵게 한다. 스풀(12)은 제1 플랜지부(12b) 및 제2 플랜지부(12c)의 양단 외주로 돌출되고, 제1 환형부(14a) 및 제2 환형부(14b)의 선단부와의 사이에 약간의 간극을 두어 설치되고, 제1 플랜지부(12b)와 제1 측판(8) 사이 및 제2 플랜지부(12c)와 제2 측판(9) 사이에 낚싯줄이 진입하는 것을 방지하는 제1 낚싯줄 진입 방지부(12f) 및 제2 낚싯줄 진입 방지부(12g)를 구비하고 있다. 제1 낚싯줄 진입 방지부(12f) 및 제2 낚싯줄 진입 방지부(12g)는 제1 환형부(14a) 및 제2 환형부(14b)의 선단부와의 사이에 약간의 간극을 두어 설치되고, 제1 플랜지부(12b) 및 제2 플랜지부(12c)의 제1 원통부(12i) 및 제2 원통부(12k)의 외주면과 직교하도록 배치되어 있다.