PURPOSE: A machine for peeling balloon flower is provided to perform efficient work by continuously conducting peeling work by an automated device.CONSTITUTION: A peeling device is installed inside of a housing in order to maintain a constant interval between a first roller(201) and a second roller(202) among rollers positioned in the upper part, so that a balloon flower put into a hopper is flowed in. A first gear(330) and a second gear(331) rotated by a drive motor(310) is mounted on a first rotary shaft(321) and a second rotary shaft(322). A rotary shaft(320) is combined to a first connector(351) and a second connector(352) having gear teeth for tightening chains(340). Rotating means are composed of the driving motor, the rotary shafts, the gears, the chains, connectors(350), shaft member connectors(360), and a connecting shaft member(380). The connecting shaft member is composed of concaved portions corresponding to inserting projections of projected connection shafts(220) of the rollers, on one side and shaft member connectors having the gear teeth for tightening the chains to the connectors connected to the rotary shafts, on the other side. The diameter of the first roller(211) installed at the upper and lower parts is bigger than other rollers. The gap between the multiple rollers(206) at the upper part and the multiple rollers at the lower part is 1cm to 2cm. The gap between the first and second rollers at the upper part does not exceed 2/3 of the diameter of the first roller at the lower part. The shaft center of the first roller at the lower part is located in the center of the space between the first and second rollers installed at the upper part. The rotational direction of the first roller at the upper part and multiple rollers at the lower part is clockwise. All the rollers other than the first roller at the upper part are rotated counterclockwise.COPYRIGHT KIPO 2013본 발명은 도라지 박피기에 관한 것으로, 본 발명은 상측에 도라지를 투입하는 호퍼와 껍질 및 박피 된 도라지가 배출되도록 배출구가 형성된 하우징과, 외주면에
