A health care mesh bed comprises a mesh fabric (2) and a weight-bearing frame (1) the mesh fabric is made by interwoven warps and wefts (21), and the junction points of the warp and the weft are fastened by relatively fixed connection the diameter of a mesh hole or the diameter of the incircle of a mesh hole is 2 to 6 times the diameter of the warp and the weft constituting the mesh a mesh unit has a mesh opening area accounting for 35-78% of the total area of the mesh unit the diameter of a mesh hole or the diameter of the incircle of the mesh hole is less than 1.5 mm and the diameter of the warp and the weft constituting the mesh is less than 0.55 mm the thickness of the mesh fabric is less than 1.1 mm at least two edges of the mesh fabric are suspended between two corresponding opposing sides of the weight-bearing frame, thus forming a structure with fixed relative position, which can not only ensure the warp and weft of the fabric will not cause skin damage, but also maintain good air permeability to the skin and make bedsores less likely, as well as create a good environment for skin recovery for a burn patient.
