#$%^&*AU2010202056C120121025.pdf#####ABSTRACT: The presence of a select analyte in the sample is evaluated in an electrochemical system using a conduction cell-type apparatus. A potential or current is generated between the two electrodes of the cell sufficient to bring about oxidation or reduction of the analyte or of a mediator 5 in an analyte-detection redox system, thereby forming a chemical potential gradient of the analyte or mediator between the two electrodes. After the gradient is established, the applied potential or current is discontinued and an analyte-independent signal is obtained from the relaxation of the chemical potential gradient. The analyte-independent signal is used to correct the analyte-dependent signal obtained during application of the potential or current. This correction allows an improved 10 measurement of analyte concentration because it corrects for device-specific and test specific factors such as transport (mobility) of analyte and/or mediator, effective electrode area, and electrode spacing (and as a result, sample volume), without need for separate calibration values. The analysis can be performed using disposable test strips in a hand held meter, for example for glucose testing.
