Carrier for furred animals for installation in vehicles, having two side walls (1, 1 '), a front wall (2) and a cover wall (3) consisting wholly or partially of a material network Flexible, characterized in that the flexible web material has a mesh width <；1.5 mm and that the carrier can be arranged in a cargo space of the vehicle having a rear opening which can be closed by a rear cover, wherein the carrier on the side opposite the front wall (2) an opening (11) corresponding at least roughly to the rear opening of the vehicle and can be fastened the edges of the side walls (1, 1 ') and wall cover (3) and, where appropriate, of the bottom (4) along the opening (11) in the opening edge of the rear opening can be closed by the back cover or presenting the carrier in face opposite the front wall having an opening and pu diéndose secure the edges of the side walls and the lid wall and, if applicable, the bottom through a flexible intermediate piece into a tube along the opening, in the opening edge of the opening rear closable by means of the rear cover.Transportín para animales con pelo para la disposición en vehículos, que presenta dos paredes laterales (1, 1'), una pared delantera (2), así como una pared de tapa (3) que se componen total o parcialmente de un material de red flexible, caracterizado por que el material de red flexible presenta un ancho de mallas <； 1,5 mm y por que el transportín se puede disponer en un espacio de carga del vehículo que presenta una abertura trasera que se puede cerrar mediante una tapa trasera, presentando el transportín en la cara opuesta a la pared delantera (2) una abertura (11) que corresponde al menos de forma aproximada a la abertura trasera del vehículo y pudiéndose fijar los bordes de las paredes laterales (1, 1') y de la pared de tapa (3), así como, en su caso, del fondo (4) a lo largo de la abertura (11) en el borde de abertura de la abertura trasera que se puede cerrar mediante la tapa trasera o presentando el transpor
