The utility model relates to medical equipment, in particular to wheelchairs for the disabled and can be used to move people with limited mobility on horizontal, inclined and stepped surfaces, including in winter. The stroller has dimensions and weight that allow it to be used in small rooms, as well as transported in cars. The wheelchair consists of a frame 1, a mechanism for lifting stairs 2, a chair 3, motor wheels 4, brackets for rear motor wheels 5, drive brackets rear motor wheels 6, drive seats 7. The mechanism for lifting the stairs consists of two multi-beam wheels 14 rigidly fixed to the shaft 12 and the gear motor 15 rotating them and is mounted on the frame 1. The frame 1 of the stroller is composite, consisting of the frame of the frame 7 and telescopically incoming x a slide 9 in it, preventing the stroller from tipping forward when moving along the stairs. The multi-beam wheels (4-6 beams) 14 are regular polygons with a quick-release lugs 16. The stroller is equipped with a gyroscopic stabilization system for the chair, which is designed to support the seat of the chair 3 in a horizontal position when moving the stroller on inclined surfaces and stairs. The wheelchair works as follows. Before climbing (lowering) the stairs, ramp or onto the escalator Atore, as well as when overcoming the curbs, the slide 9 is pushed forward as far as possible and fixed in this position, the seat stabilization system is turned on. To climb the stairs (or to overcome the curb), the stroller, with the slide extended 9, backs up to the staircase (curb) to the stop to the lower step with the rear motor wheels 4. Drives 6 rotate the brackets of the rear wheels 5. At the same time, the rear motor wheels 4 go forward and up, and the carriage is lowered by the multi-beam wheels 14 of the lifting mechanism 2 to the ground. duktora 15 multipath wheel 14 of the lifting mechanism 2 begin to rotate back and "walking" up the stairs, up the stairs. At the same time, the slide 9 slide
