A method for forming multicomponent pochvosmesi lies in the fact that the first design, and then fabricated device into which include common hopper cylindrical or polyhedral form, divided into sections of the number equal to the number of components, the bottom of each section operate inclined at an acute angle to the horizontal and autonomous suspended on the spring or rubber shock absorbers, vibrators and supply them in each section is performed at least on three vertical pneumatic line with the same pitch nozzles rigidly prikrep ennyh to the walls of the hopper and the webs, is provided with a compressor mixer vozduhofiltrom, safety and pressure relief valves such control, which allows to obtain different maximum and operating air pressure pnevmagicheskoy system mixing component of each sector and the pulse mode operation of each of the pneumatic system, moreover, the unloading transporters operate pshekovym and suspended pivotably to the hopper and the attachment point of the screw body, wherein it is provided with a hydraulic or pneumatic cylinder gearboxes Oron actions adjust the device to the predetermined conditions, then charged with each section of the desired component loader of suitable type, Commission, and pneumatic stirring system component of each sector and components go through dosing into the mixing drum where the top metered portions come fertilizers and concentrated additive, then the resulting multicomponent pochvosmes the screw conveyor is discharged into a vehicle, wherein the height of said conveyor is adjusted if necessaryСпособ образования многокомпонентной почвосмеси заключается в том, что сначала проектируют, а затем изготавливают устройство, в которое включают общий бункер цилиндрического или многогранного вида, разделенного на секции числом равным числу компонентов, причем дно каждой секции выполняют наклонным под острым углом к горизонту и автономным, подвешенным на пружинных или резиновых амортизаторах, снабжают их вибраторами и в ка
