PROBLEM TO BE SOLVED: To make it possible to separate a konjak plate into cuboids or cubes when it is torn up while preventing it from becoming strange shapes, with respect to the konjak plate to which deep cuts has been processed beforehand so that it can be separated into small blocks.SOLUTION: Shallow cuts are provided from the top and bottom sides of a konjak plate toward inside in a vertically symmetric manner with a distance of less than 3 mm in the longitudinal and lateral directions in a grid pattern. Between the shallow cuts, two deep cuts separating the lateral direction into three are provided from the top and bottom sides in a vertically symmetric manner, and three or two deep cuts separating the longitudinal direction into four or three respectively are provided from the top and bottom sides in a vertically symmetric manner. By the separations along the deep cuts, 9 pieces or 12 pieces of small blocks in cuboid or cubic shapes can be formed.COPYRIGHT: (C)2016,JPO&INPIT【課題】板コンニャクに深い切れ目をいれて小さいブロックに分割可能としたコンニャクにおいて、千切った状態で異形にならず直方体や立方体に分割できるようにする。【解決手段】板コンニャクの上下面から内部に向けて上下対称に浅い切れ目を縦横方向に3mm未満の間隔をあけて格子状に設ける一方、前記浅い切れ目の間に、横方向を3等分する2本の深い切れ目を上下面から上下対称に設けると共に、縦方向を4等分する3本または3等分する2本の深い切れ目を上下面から上下対称に設け、前記深い切れ目に沿って分割して直方体形状または立法体形状の9個または12個の小さいブロックを形成可能としている。【選択図】図1
