PURPOSE: A flowerpot for landscape architecture is provided to be able to firmly install various landscape structures such as a flower tower or a flower wall without a separate supporting apparatus by convenient lamination and combination, and to conveniently manage the irrigation etc.CONSTITUTION: A flowerpot for landscape architecture comprises: a planting part(10) with an opening on the top a reservoir(20) with a drain hole(21) on the bottom a partition wall(30) for the separation of the planting part and the reservoir and a drain pipe(40) which is tightly inserted into the drain hole, and has an inlet port(41) formed in order to be positioned at a predetermined height within the reservoir on one end and a discharge port(42) on the other end. The partition wall has a slit(31) for supplying water flowed into the reservoir to the planting part. The drain pipe is formed in a rectangular shape and has the discharge port and the inlet port on both ends of the drain pipe, or the drain pipe is formed in a straight type and has the inlet port on the side part of the drain pipe. The discharge port of the drain pipe is formed to pass through the drain hole and to be exposed to the bottom surface of the reservoir. The drain pipe is fixed to the bottom surface of the reservoir using a fixing tool. A binding protrusion is formed in the outer periphery of the fixing tool, and a binding groove corresponding to the binding protrusion is formed in the upper part of the exterior wall of the reservoir. The slit is formed in a vertical direction to the ground. The lower part of the inlet port of the drain pipe is formed in a position relatively higher than the lower part of the slit. The lower edge of the slit is formed in order to be in accordance with the lower-side of the reservoir. The planting part has a cross section with a wide front and a narrow tail end.COPYRIGHT KIPO 2013본 발명은 조경용 화분에 관한 것으로, 조경용 화분 자체가 기본구조가 되어 별도의 지지장치나 구조물 없이 견고한 꽃탑이나 꽃벽 등 조경물이 설치되고, 원형 꽃탑, 직선형 및 곡선형의 꽃
