The device for applying liquids and solutions consists of a hermetically sealed container 1 at the ends of which absorbent tampons 2 are located. At that, the container is filled with liquid or solution 3 intended for application to the surface. The tightness of the container 1 and the sterility of the liquid or solution 3 contained therein is ensured by the fact that the container 1 is on one side structurally drowned, and on the other hand, between the open end of the container and the liquid or solution contained therein, there is a silicone membrane 5. The total length of the applicator, The container and two adsorbing elements (tampon) are 65 mm to 95 mm. Absorbent elements 2 have the same dimensions - an outer maximum diameter of 4.6 mm to 8.2 mm. On the outer surface of one of the absorbent elements, namely the adsorbent element, located on the side of the muffled end, in the projection of the line of break 4, a colored marker 7 is marked in the form of a ring-marker. The length of the container, free from adsorbing elements, is from 40 mm to 65 mm, the outer diameter of the container is from 2 mm to 5.5 mm, the inner diameter is from 1 mm to 5.3 mm. The surface of the container, which is free of absorbent tampons 3/4 in length, is smooth and the remaining 1/4 of the length, from the side of the muffled end, has an uneven surface along the entire perimeter. 6. At the edge of the applicator end, on the side of the muffled end, on the side with an uneven surface there is a line of break 4. An uneven surface on 1/4 of the entire length of the container, free from adsorption elements, from the side of the muffled end is formed by longitudinal incisions 8 or transverse incisions 9, or longitudinal edges 10,Устройство для нанесения жидкостей и растворов состоит из герметично закрытого контейнера 1, на концах которого расположены адсорбирующие тампоны 2. При этом контейнер заполнен жидкостью или раствором 3, предназначенной для нанесения на поверхность. Герметичност
