A method for manufacturing a GTR implant includes the following steps of: making a high polymer solution and then putting it into a syringe tube setting process parameters disposing or clamping a metal supporter on a collector extruding the high polymer solution outside a needle tip by a syringe rod, energizing the high polymer solution to have an electric charge by the voltage of a power supply, curing the extruded high polymer solution by a heater, whereby an absorptive high polymer fiber film is formed on the metal supporter so as to finish a composite process of the absorptive high polymer fiber film and the metal supporter implementing a linking process of the composited absorptive high polymer fiber film cleaning the linked absorptive high polymer fiber film and thermally drying the cleaned absorptive high polymer fiber film.一種引導組織再生之植入物的製造方法包含:製備一高分子溶液,並放置於針筒內;設定製程參數;將一醫療級之金屬支架置放或夾持於收集器上;利用注射桿,將針筒內之高分子溶液擠出針頭之尖端外,藉由電源供應器之電壓使高分子溶液帶有電荷,並藉由加熱器使將噴出之高分子溶液乾燥與固化,以使一可吸收性高分子纖維薄膜形成於金屬支架上,以完成金屬支架與可吸收性高分子纖維薄膜之複合製程;進行該複合後之可吸收性高分子纖維薄膜的交聯製程;潤洗該交聯後之可吸收性高分子纖維薄膜;以及加熱乾燥該潤洗後之可吸收性高分子纖維薄膜。100...靜電紡絲裝置110...注射桿112...高分子溶液120...針筒122...管路130...針頭132...固定器140...高電壓電源供應器150...加熱器160...收集器162...金屬支架164...高分子纖維薄膜170...輪軸
