The guide wire for bag loading and insertion of the percutaneous pump attached to the cannula is made of a first material and includes a proximal section with a first diameter, a round proximal end and a distal end. The guide wire is comprised of a second material and includes a distal section having a second diameter greater than the first diameter, a distal end, and a proximal end adjacent the distal end of the proximal section. The first material of the proximal section is selected to be ductile than the material of the percutaneous pump to reduce damage to the pump during back loading. The distal section of the guide wire is configured to be stiffer than the proximal section to insert the percutaneous pump at the desired location without damaging the guide wire.캐뉼러에 부착된 경피 펌프를 백로딩 및 삽입하기 위한 가이드 와이어는 제 1 재료로 이루어지고, 제 1 직경, 둥근 근위 단부 및 원위 단부를 가지는 근위 섹션을 포함한다. 가이드 와이어는 제 2 재료로 이루어지고, 제 1 직경보다 큰 제 2 직경, 원위 단부 및 상기 근위 섹션의 원위 단부에 인접한 근위 단부를 가지는 원위 섹션을 포함한다. 근위 섹션의 제 1 재료는 백로딩 중에 펌프에 대한 손상을 줄이기 위해 경피 펌프의 재료보다 연성으로 선택된다. 가이드 와이어의 원위 섹션은 가이드 와이어를 손상시키지 않고 원하는 위치에 경피 펌프를 삽입하기 위해 근위 섹션보다 강성으로 구성된다.