The compact device for separation and cleaning consists of chasis (1) and is supported by scattering (2) and transverse axis (3).a. It also includes a universal coupling gun (4) and a standard Trailer (5);The chassis (1) is part of the treatment tunnel designed by lolargo from one point of view (6), from the bottom half to the front, and the upper part to the back; The processing tunnel (6) is an assembly structure of the feeding port (7) connected with the driving assembly (8a), while the reverse direction is synchronized with the agitator assembly (9), under which the grain, east grain and West grain intermediate separation assemblies (10) are installed. The first one ended up in a forced income boxAt the same time, the air flow is divided into two parts, i.e. suction (air input) and blowing (air output), to supplement the cleaning in two stages,At this point, the adsorption point is the top of the granospar separation and cleaning intermediate (10) to remove dust and similar particles, while a dust remover is placed on the top of the batidor assembly (9),In order to facilitate the discharge of the thicker waste material and place it under the forced ventilation device (11) at the end of the chassis (1),Determine the Shenzhen plan (12) and vibration plan (13) of clean grain,And the rear part of the driver (8B) is also included, which in turn forms the stretching and synchronization of the mixer array (9) which separates and cleans the intermediate (10) at the same time,Ventilation device (11) and vibration device (13).IMPLEMENTO COMPACTO PARA LA SEPARACIÓN Y LIMPIEZA DEDIVERSOS GRANOS constituido por lo chasis (1) apoyado sobre el disparohabitual (2) y el eje transversal (3), que también incluye una lanza de acoplamientouniversal (4) y un pie de remolque habitual (5); en el chasis (1) está integrado a lolargo de un túnel de procesamiento (6) dispuesto en un ángulo, dejando la parteinferior hacia la parte frontal, mientras que la parte superior se gira hacia atrás;