Support for a medical implant (I) or a medical implant component with a grip section (2) and a retention section (3), in which the support a. it has a base element (6) arranged in the retention section (3), as well as b. it has at least two retention pins (4, 5) arranged at a distance from each other in the retention section (3), which extend from an outer side (7) of the base element (6) in axial direction, respectively , up to a free end (12, 13)； characterized by c. it has at least one housing hole (8) in the base element (6), which crosses the base element (6) from an inner side (9) opposite its outer side (7) to the outer side (7) and continuously narrows over at least one section (10) in the direction of the outer side (7) - in which at least one first retention pin (4) is configured as a retention pin (4) inserted in the housing hole (8) with a play with an axial section (11), in which it presents in the direction of the free end (12) a diameter that narrows conically, - in which the first retaining pin (4) also has a pressure surface (14) configured at its end that is disposed on the inner side (9) of the base element (6), - in which the section (10), in which the housing orifice is continuously narrowed ( 8), and the axial section (11) of the first retaining pin (4) are formed with the narrowing diameter conically so that when the first pin (4) is seated in the housing hole (8), it is pivotable around a pivot point, formed through the collaboration of the section (10) that continuously narrows of the orifice (8) and axial section (11) of the first retaining pin (4) that continuously narrows in diameter, transversely to its longitudinal axis. d. it has a pressure element (15) movable in the direction of the inner side (9) of the retention section (3), which acts on a section of the pressure surface placed on one side of the middle axis (21) of the first pin of retention (4) and that does not cover this middle axis (14).Soporte para un implante médico (I) o u
