Provided is a robot parts lubricant automatic drip irrigation system, comprising a C-shaped base (1). The C-shaped base (1) is provided with a notch at each of the upper and lower ends of a front surface, and a rubber gasket a (12) and a rubber washer b (13) are respectively embedded in the notch. A clamping bolt (4) is screwed on the side of an upper end of the front surface of the C-shaped base (1). The upper and lower ends of the C-shaped base are respectively provided with a notch implant syringe (2). A syringe needle (3) is screwed under the syringe (2), and the top is covered with a syringe cover (5). A valve core (6) is disposed at a center of the syringe cover (5). The back of the C-shaped base (1) is hollow and provided with a groove, and a rail strip (9) is fixed in the groove. A slider (10) is erected on the rail strip (9), and the slider (10) is fixed by the bolt and a wall panel (7). A limiting block (11) is arranged at the end of the rail strip (9). A screw hole is provided at the top end of the C-shaped base (1), and a fine adjustment bolt (8) penetrates the screw hole and is in contact with the top end of the slider (10). The automatic drip irrigation system has a simple structure, a high degree of structural rigidity, and is not easily damaged.Linvention concerne un système dirrigation goutte à goutte automatique de lubrifiant de pièces de robot, comprenant une base en forme de C (1). La base en forme de C (1) est pourvue dune encoche au niveau de chacune des extrémités supérieure et inférieure dune surface avant, et un joint en caoutchouc a (12) et une rondelle en caoutchouc b (13) sont respectivement incorporés dans lencoche. Un boulon de serrage (4) est vissé sur le côté dune extrémité supérieure de la surface avant de la base en forme de C (1). Les extrémités supérieure et inférieure de la base en forme de C sont respectivement pourvues dune seringue pour implant à encoche (2). Une aiguille de seringue (3) est vissée sous la seringue (2), et la
