Disclosed are a shaft unit (30) comprising a carbon pipe (10) obtained by molding a carbon fiber composite material sheet after rolling the same in a tapered shape in which the root part thereof is wide and the end part thereof is narrow, a metallic pipe joint (20) bonded to the outer circumferential surface on the end of the carbon pipe (10), and a rubber coated layer (12) formed on the outer circumferential surface on the root part of the carbon pipe (10) and a shaft for a high elevation work tool, which is formed by connecting the shaft units. The carbon fiber composite material sheet is divided at regular intervals between the rubber coating layer (12) and the outer circumferential surface on the root part of the carbon pipe (10) so that multiple taping projections (11) coated with tape are produced. When the projections are bonded to a rubber coated layer (12) that has an appropriate deforming ability, changes can be induced, in which the projections are less compressed and less twisted in the area that becomes wider toward the root of the pipe and in which they are more compressed and more twisted in the area that becomes narrower toward the end of the pipe. Then, a pushback-preventing support surface having a very wide bandwidth is produced. Accordingly, the carbon pipe is far lighter and far stronger than aluminum extruded pipes so as to be used as a shaft for high elevation work. Moreover, even when the shaft is pushed to the front during a high elevation work, the pushed-out carbon pipe is not pushed back inside, so that the shaft for high elevation work tool is very productive.COPYRIGHT KIPO 2014[Reference numerals] (AA,BB) End part (CC) Root part탄소섬유복합재료 시트를 뿌리부분이 넓고 끝부분이 좁은 테이퍼 형상으로 말아서 성형한 카본파이프(10)와 상기 카본파이프(10)의 끝부분 외주면에 부착 결합되는 금속재질의 파이프조인트(20), 그리고 상기 카본파이프(10)의 뿌리부분 외주면 위에 형성된 고무코팅층(12)을 포함하여 구성된 샤프트유닛(30)과 이를 다수 연결 구성한 고지작업구용 샤프트가 개시된다. 카본파이프(10)의 뿌리부분 외주면과 상기 고무코팅층(12) 사이에는 탄소섬유 복합재료 시트를 일정 간격으로 분할하여 테이핑 접착한 다수의 테이핑돌기(11)가 더 형성되며 돌기들은 적당한 변형력을 가
