A kind of Coffin supporting structure improvement of what is closed in this creation system,The coffin mainly by bottom plate,Pillar,Partition and lid composition,The setting of its insole board what periphery is connected with each other and is formed the side strip of an accommodating area,The wall surface system at the corresponding each side strip what both ends of what at least one forms an at least fixation hole,And side is contradicted using the fixed plate of each posts bottom,And be mutually fitted and fixed with the fixing piece in fixed plate with fixation hole,The fixed Hou in position of each pillar is completed,Partition system is fixed respectively in each pillar of what and each guide groove of reciprocal correspondence,The assembling for completing coffin is used,And assembling convenience simple by what overall structure,Therefore it can reach the purpose of easy what storage carrying.本創作係關於一種棺材板支架結構改良，該棺材主要由底板、支柱、隔板及蓋體組成，其中底板於週邊設置相互連接並形成一容置區之側邊條，於至少一相對應之各側邊條於兩端之壁面係形成至少一固定孔，並利用各支柱底部的固定板抵觸側邊，並將固定板上的固定件與固定孔相嵌合固定，完成各支柱的位置固定後，將隔板係分別固定於各支柱且相互對應之各導槽中，藉以完成棺材的組裝，由於整體結構簡易且組裝便利，因此可達到易於收納搬運之目的。
